|
#1
|
|||
|
|||
73 360 Damper...bad vibrations ..help
I have a 74 Plymouth with a 73 360 Engine from a police car and a 727 from a 73 roadrunner, I have vibration problems and was hopeing someone could tell me the visual differance in a 318 and a 360 Damper because I am not 100% sure my engine has the correct one. I believe the crank is shot peened? and there are two weights on the torque convertor
|
#2
|
|||
|
|||
The 360 damper has a half moon shape out of part of it.If you look at it flat on a bench,with the front of it up it will have a shape like a "C".The 318 damper is not like that.
|
#3
|
||||
|
||||
You also need to check and see if oyu have a 360 torque converter. THey have weights on them and a 318 does not.
|
#4
|
|||
|
|||
Early 360's had a raised counter weight and later 360's had a 1/4 moon sized grove machined out of the damper.
He did say there were weights on the TQ.. |
#5
|
|||
|
|||
Thanks ALL....It turns out that it was a 318 ballancer and I replaced with the correct one....a world of differance...the converter was correct...thanks once again for all the help
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bad Vibrations | Otherguy | Ram Truck Chat | 2 | 06-13-2007 10:58 AM |
bad vibrations | underdog39 | Dakota Truck Forum | 19 | 12-26-2005 02:14 PM |
Bad Vibrations | VICOUS | Durango Chat | 0 | 07-10-2003 02:47 PM |
Bad vibrations | maxb45678 | Performance Talk | 4 | 07-06-2003 09:15 AM |
Vibrations | wayne mros | Dakota Truck Forum | 0 | 09-22-2001 09:37 AM |