Small block copper header gaskets

[coupe32]

Anyone know where to get header gaskets for large port small block heads? I would like to use copper gaskets but all I can find are the small port ones. What does everyone else use?

[345Dart]

Originally Posted by coupe32

Anyone know where to get header gaskets for large port small block heads? I would like to use copper gaskets but all I can find are the small port ones. What does everyone else use?

High compression - Cometic MLS

[coupe32]

I was actually needing exhaust header gaskets and not head gaskets.

[peg leg]

And call or email TTI. They should be able to supply them. Do a google search on TTI exhaust.
Ron

[dodger1]

When you say small-block large-port heads, are you referring to W or aftermarket heads, or just 340/360 heads? I use Mr Gasket copper units on my 360 (stock heads)

[345Dart]

Originally Posted by coupe32

I was actually needing exhaust header gaskets and not head gaskets.

my bad - I missed the "er". I still use Cometic header gaskets and have no leaks. The TTis are hanging on the wall.

[coupe32]

I need the header gaskets for X heads and later I will need some for eldelbrock 6077 heads. The ones I have been seeing are for the small block stock heads. (small ports) I bought some copper ones from Sanderson but they are for the small port stock heads. Thanks everyone for your input.

[dust]

My TTI gaskets ports were alittle too small for my TTI headers and Eddy heads (black 1/8" into the gasket...

So... I'm kinda in the same boat figuring out what gaskets to run.

[Dart]

You will need to "port" the gaskets to match them up with your application.

[dgc333]

Aren't the size and shape of the exhuast port the same on all factory sb heads? I know the 273/318 used a head with smaller intake ports but I have never heard of or seen of a different size exhaust gasket.