|
#1
|
|||
|
|||
Electrical question
My 72 Cuda has a Chrysler 60 or 70 amp alternator with 3 wires. Which wire is the alternator output, as I have been told I should run that to the 12 volt terminal on the starter relay to minimize deterioration of the firewall bulkhead connector.
http://www.allpar.com/history/mopar/electrical.html |
#2
|
||||
|
||||
The large stud with the nut on it feeds the battery.
|
#3
|
|||
|
|||
Thanks. Anyone out there run a wire from the alternator to the starter relay, while leaving the existing wire from the alternator to the ammeter?
http://www.madelectrical.com/electri...p-gauges.shtml |
#4
|
||||
|
||||
yup. done it a few times. works fine. would still reccommend getting rid of the ammeter, and its pretty much a useless current draw.
Michael |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Electrical question | aspen514 | Performance Talk | 6 | 07-26-2007 05:39 PM |
Electrical question | 1Longbow | Ram Truck Chat | 2 | 11-12-2001 07:04 AM |
Electrical Question | studjr | Restoring your MoPar (Tricks & techniques) | 3 | 08-02-2001 03:50 AM |
Electrical Question | DodgeMan79 | Ram Truck Chat | 10 | 03-08-2001 04:52 AM |
Electrical Question | Bob Warfield | Ram Truck Chat | 3 | 01-04-2000 04:10 AM |