|
|
|
|||||||
|
#1
09-02-2007, 06:11 PM
|
|||
|
|||
what fan to use
I have the original 7 blade clutch fan off my 318 factory air 72 swinger. Will this cool my 535 hp 416 that I put in the car or should i use the MP viscous fan? I am using a northern 26" aluminum radiator with the northern shroud. I will be using a external tranny cooler.
|
|
#2
09-02-2007, 08:53 PM
|
|||
|
|||
|
As long as you're positive the viscous hub is working OK, the 7 blade should work if it fits into the shroud correctly. I had a cooling problem years ago and after lots of $$ I bought a Hayden repop fan hub and sure enough that fixed it. Also see the comments in dartster's threadhttp://www.moparchat.com/forums/showthread.php?t=106765
|
|
#3
09-02-2007, 09:32 PM
|
||||
|
||||
That fan should work just fine. IF you want to go electric go with a Spal fan. You wont find a better one out there. Most common I'd say is there 2450 cfm model. IT's 15" and very thin and uses very little power.
|
|
#4
09-03-2007, 02:48 AM
|
|||
|
|||
|
If you got an aluminum radiator, almost anything will work. On my 600 hp cuda i rarely turn on the electric fan, as long as the car is moving. the hood is vented, so air goes through the rad very well. I just use a small 14 inch $79 Summit electrical fan with no shroud.
|
 |
|
|
Linear Mode
