|
#1
|
||||
|
||||
intakes
what would be a good intake for a 360 60 over flat top pistons cam is a 110 deg lobe sep 106 cent line 564 int 564 ext im not exact on all specs comp cams 20-229-4 with 1.5 roller rockers
|
#2
|
|||
|
|||
What kind of cylinder heads? Hope that your pistons are also at zero deck, so that you've got some CR, you need it with that cam. And of course valve to piston clearance must be checked. That's a pretty big cam, single plane territory. I think M1 single plane or victor 340 might be good intakes for that combo.
|
#3
|
|||
|
|||
Definitely
Edelbrock Airgap. Torque and top end, cool intake air, great appearance.
|
#4
|
|||
|
|||
For a racecar the Victor. For street/strip Performer RPM. -Bob
|
#5
|
|||
|
|||
If it's a stick/3.91up car use the M1 ,Weiand x-celerator.
If it's a auto/gear or no gear use the RPM/air gap/LD340 Of course IF it's auto/high stall 2800+/lots of gear, back to the single planes. |
#6
|
||||
|
||||
intakes
yea its a four speed od cast iron case trans im putting in it
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Intakes | 69ROADRUNNER69 | Performance Talk | 5 | 04-01-2004 10:49 AM |
360 Intakes | FARGO318 | Performance Talk | 4 | 04-05-2003 08:43 AM |
W-2 Intakes? | Drtswgr340 | Drag Racing Forum | 4 | 07-23-2001 12:50 AM |
other intakes? | MrAnderson | Ram Truck Chat | 4 | 07-23-2001 12:28 AM |
INTAKES | BrianLyttle | Performance Talk | 2 | 05-09-2000 04:33 AM |