|
#1
|
|||
|
|||
Head leaking
Got an annoying oil leak since I got the new motor running (318 with 360 heads) its coming from the rear lower corner of the left head, checked the valve covers, intake, distributor, there all bone dry, any suggestions would be appreciated.
|
#2
|
|||
|
|||
rear of intake is not sealed...
had same problem....clean area with brake cleaner...and squeezed blue rtv into the area...sealed it... |
#3
|
|||
|
|||
Its not the manifold I can see and feel back there, completly dry.
|
#4
|
||||
|
||||
oil pressure sender?
|
#5
|
|||
|
|||
Got
An "O" ring under the distributor flange?
|
#6
|
|||
|
|||
Cylinder head dowel mashed in/near to aligning hole and/or dowel too long and also mashed into reciever hole?
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
400 CID Head leaking | Alex_H | Vintage MOPAR chat | 3 | 04-26-2009 11:09 PM |
Water leaking from head gasket | 74 DART SWINGER | Performance Talk | 2 | 01-26-2005 11:40 PM |
leaking head gasket question | ep87 | Vintage MOPAR chat | 2 | 09-03-2004 12:03 AM |
Leaking Head | BakedMopar | Performance Talk | 10 | 03-31-2003 06:34 PM |
cast iron head leaking internal? | mopardude | Performance Talk | 3 | 09-12-2000 04:32 AM |