IMCA 360 and 400 engines for sale

[brian sauser]

mopar 360 IMCA stock car motor for sale, 6 races on new build.

.30 over 360, eagle cast crank, eagle SIR rods, full floating, KB hyper. cast pistons cut by hughes engine for 64 cc magnum heads, 12.5 to 1. EQ monster magnum heads, Stainless steel 2.02 1.60 valves, hardend exhaust valve seats, springs good up to .550 lift, guide plates, 3/8 screw in studs, comp cam push rods, solid comp cam .535 .545 lift with 1.6 rockers, comp cam lifters, doubler roller t-chain, windage tray, lifter valley tray, weiand IMCA intake, carter perf fuel pump, stamp steel roller tip chevy 1.6 rockers, kevko oil pan and pickup tube for stock location, melling stock volume oil pump with high psi spring kit, aluminum valve covers, new water pump, 318 fluid balancer, clevite 77 bearings, perfect circle ductile iron plasma moly ring kit.

ran great 190, 70 psi at 6400 RPM's
$3500 or best offer over $5000 invested

Also have mopar .30 over 400 big block with stock 383 forged steel crank.

stock polished rods with good bolts
Ross forged pistons 10.5 to 1
stock '73 year heads, valve job and port work, good valve springs, Mopar purple solid cam .557 lift, stock cast iron intake lightend and port matched, kickout pan and pickup, windage tray, cast aluminum valve covers, stock 383 balancer, new aluminum water pump and housing

engine was built for street stock class, cast iron intake and exhaust, 4bbl carb.
tons of bottom end torque.
never ran over 210, 70 psi at 6500 RPM's, was leading IMCA track points when removed to install the small block.
$1800 or best offer

call or email me
620 369 0090
bdsracer@yahoo.com