|
#1
|
|||
|
|||
pushrod length
I am buying new heads and converting to a roller camshaft on a Chrysler 440. What is the best method for measuring required pushrod length?
http://440source.com/rockerarms.htm http://440source.com/camlifters.htm p# 200-1088 Note that the rocker arms have some adjustment in them. Is there some type of spacing tool availible? |
#2
|
|||
|
|||
The accurate way
Is to insert a lifter which you intend to use, and the rocker arm you intend to use, and borrow or buy an adjustable push rod. Follow the builder's instructions from there.
|
#3
|
|||
|
|||
simple enough... any good sources for custom made rods? and any other suggestions in their purchase?
|
#4
|
||||
|
||||
ask 440source, they should have the adjustable pushrod and they can get you the correct length pushrods from there.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pushrod Length | BELVEDERE2 | Performance Talk | 2 | 05-24-2009 09:48 AM |
pushrod length' | gorsic | Drag Racing Forum | 5 | 12-27-2005 02:27 AM |
sb pushrod length | sefus | Performance Talk | 2 | 07-21-2005 10:46 PM |
pushrod length | 5th_Ave_Sleeper | Performance Talk | 3 | 04-11-2005 09:18 AM |
MP Pushrod Kit (cut to length) | TD | Performance Talk | 1 | 10-30-1999 02:22 AM |