|
#1
|
||||
|
||||
does anyone why K&N doesnt make the filter charger for the 2000 3.9? they make them for the later model 3.9.s why wont they fit mine? and does anyone know if the one for the 5.9 will fit the 3.9?
------------------ AKA GRNFSH: 70'cuda 440+6 ,2000 4x4 3.9L dakota sport |
#2
|
|||
|
|||
I know the 97-99 K&N kits fit the 3.9, I'm sure the same is true for the '00s. The 3.9, 5.2, 5.9 all share the same air hat and stock intake.
|
#3
|
|||
|
|||
K-N cold air intakes for 97-99 daks will fit the 2000 with a little "adjustment" Here's an old post from someone who did it. http://www.moparchat.com/ubb/Forum46/HTML/000293.html
------------------ 2000 Dakota SLT QC 360, Magnum Performance throttle body, 8.5 mm MSD wires,180 thermostat, Autolite 3923 plugs, 3 chamber Flowmaster with 2.5" pipes straight out the back, Trans-Go shift kit, Mopar PCM, 255-55-17's on R/T wheels,Ceramic coated Mopar headers, MSD6BTM with SS blaster coil,Powerdyne S/C |
#4
|
||||
|
||||
thanks guys, i went by the dealer today and just for grins i checked it out. the part numbers are the same for the 3.9 and the 5.9.
------------------ AKA GRNFSH: 70'cuda 440+6 ,2000 4x4 3.9L dakota sport |
|
|