|
#1
|
||||
|
||||
383-440 dimensional differences
Assuming you have an identical set of headers on both motors, what is the difference in overall width on each side (3/4?) and height (3/4?) ? Im contemplating going from a 400 to a 440 and I have critical clearance issues in a 65 A body. Namely passenger side shock tower clearance (I have about 1/2 inch, but I have more a little higher) and some around the drag link and torsion bars. Driver side fenderwell is a little easier. Thanks.
|
#2
|
|||
|
|||
Deck height difference is 9.998" vs 10.725". Must be a math formula to calculate the width differences?
|
#3
|
||||
|
||||
wow, looks to be almost exactly 1 inch, 14.14 vs 15.16 inch. Assuming the 45/45/90 triangle equation knowing the 2 90 degree sides. so 1/2 inches wider on each side. still dont know how much taller but that is less important since I just bought an '86 carb to pan, fan to trans 360/727 for 3 Benjamins delivered..not bad.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SB 318/360 Differences | zpsull01 | Vintage MOPAR chat | 18 | 03-21-2007 11:01 AM |
5.2/5.9 Differences | DrAgGiNdAkOtA | Dakota Truck Forum | 4 | 12-07-2005 09:07 PM |
413 and 440 differences | Juan Ramon | Performance Talk | 4 | 08-14-2004 04:43 PM |
What are the differences between 5.2&5.9? | NewBlackDak | Ram Truck Chat | 2 | 11-11-2001 10:08 PM |
differences between the 318 and the 340? | Sport340 | Performance Talk | 7 | 04-19-2001 11:13 PM |