dodge and plymouth b body parts

[mopar1972]

have a few mopar b body parts for sale. thes fit 1971- 74 dodge charger and 1971- 72 plymouth. i am saleing all these items need some cash for 72 plymouth RR clone build. i can email you pics of these parts just ask. i also may do some tradeing for 72 plymouth parts or 71 dodge dart grille. i have been looking on ebay at these items im saleing theme for less than what you will pay on there.drop me a email and well go from there. email me for pics. im also looking for a non running 392 hemi motor only

2 rear quarter glass for charger 50.00 for both

front and rear hood trim for dodge charger both 65.00

2 hood hings with springs 35.00 for both

all black headlinner trim for charger missing piller post covers 45.00 for all

front bumber shims for charger 45.00 both really good shape

2 black sun visors need good cleanning 30.00

up and lower black door panel for driver side for charger.or plymouth black in colop 40.00

both right and left side's rear black quarter panel covers for in side with arm reast black in color with ash trays have some rust. for dodge or plymouth b body 50.00 for both.

remote mirra works good chrome is fair. 35.00

body trin for passinger side of a 1972 plymouth b body would need some dents removed and cleand all for 50.00

vinly roff trim im mint shape for 72 plymouth 60.00

2 used dust shields for dodge or plymouth 40.00

am radio for 71-74 plymouth or charger 70.00

fire wall drain vents no chips or cracks both for 20.00

gas tank neck for charger or plymouth with cap 15.00

rear quarter in side trim for plymouth with roll up windows really good shape black in color both 40.00

cast iron intake 4 bbl for 318 or 360 20.00

antania for 71-74 dodge or plymouth 30.00

front fender head light moldings for 73 dodge charger. do have some cracks and chips but would be easy fix's both for 40.00 or best offer

water pump for 1972 318 25.00

1972 318 block good for core or rebuild with crank and one hear motor is stuck 75.00

[showstoppa_20]

pm sent mopar1972

[19dec45]

Drivers door needs a glass stop and also a window adjuster to tilt the window in or out.
We need a turn signal switch complete with wire loom and the wire connector.
We need front seat belts for bucket seats, (dark and light green).I'm not sure but I think the paint code is F8??
The car was restored in 2003, but when they put it together, it looks like they were on a deadline. A lot of corners were cut.
We also need the ducts that run from the heater to the floor vents, and the ducts that run from heater to defroster vent.
I'm sure there are other parts missing, but this will get me started, and keep me busy for a while. Any help from the Mopar World would be appreciated.


Gary