|
#1
|
||||
|
||||
wiring msd distrib to hei
i'm running an msd distribitor, and running my stock electronic ignition, so what wires do i splice together for the distribitor??
|
#2
|
||||
|
||||
meant to say color to color from stock to the msd?
|
#3
|
|||
|
|||
Hook it up with splices that are easy to change. Run it one way and check the timing with a light... Then hook it the other way and check the timing, which ever way gives the most advance is the correct way...
|
#4
|
||||
|
||||
it won't fry anything if i hook it up backwards will it?? i can remember this one time before we burnt something up by hooking it up backwards, think it was a coil we burnt up by hooking something up wrong.
the distribitor has a black wire with a tan tracer, and a black wire with purple tracer, was thinking the one with the tan tracer would maybe hook up to the tan distribitor wire?? think the other is grey on a stock mopar?? |
#5
|
|||
|
|||
No you won't hurt anything at the distributor end, and it will run either way, just not very good, if backwards...
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MSD wiring | Rons65Belvedere1 | Performance Talk | 1 | 08-25-2004 09:10 PM |
msd distrib lock in? | george a nilsen | Performance Talk | 1 | 07-02-2004 11:05 PM |
hemi roller cam distrib/oil pump gear drive | george a nilsen | Drag Racing Forum | 29 | 01-21-2004 02:19 AM |
Painless Wiring cure for Mopar Wiring? | ejoedirte | Performance Talk | 8 | 04-06-2003 11:12 PM |
Need wiring diagram or any wiring help!! | prostreet volare | Performance Talk | 1 | 04-02-2000 01:27 PM |