|
#1
|
|||
|
|||
Does anyone out there know where I can get NOS wheel well mouldings for a 1969 Road Runner?
Right now I know someone that has one for the LR, but if possible I would like to buy a complete set. I will consider used ones. However, they must be near perfect shape. Thanks in advance to those who respond! |
#2
|
|||
|
|||
Your best bet will probably be Year One or The paddock.
If you are restoring a car, they are the catalogs to have. I prefer Year One, but here is a tip. Don't place a big order until they run a special. I saved big with a order $800 when they ran a 20% off special. I you order a catalog, they will send you notices in the mail on specials. |
#3
|
|||
|
|||
You have to be careful ordering MOPAR parts from Year One, I had a friend,Now this WAS several years ago, Ordered his Hood Scoops for his '70 GTX from YO. and they came in VERY cheap fiberglass and the chrome trim that is supposed to go on the front edge was molded as a permanant piece of the scoop. So watch out!
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
parts needed | Tommy Crawford | Parts Wanted | 0 | 07-16-2010 08:33 PM |
Parts needed | BH 71 challenger R/T | Vintage MOPAR chat | 0 | 01-09-2008 02:50 PM |
parts needed | dgracerx | Circle Track Chat | 8 | 12-20-2007 07:52 AM |
some parts needed..... | murdoc2 | Vintage MOPAR chat | 2 | 11-11-2004 11:32 PM |
parts needed | rick moni | Parts Wanted | 1 | 03-16-2004 02:05 AM |