|
#1
|
|||
|
|||
Can I ask for your help?
Hello,
I have a question for you, Yes it's adumb on too. Well i'm wondering how to set timming on a 1973 Dodge Cornet 440 But the good part is I know how to set it up =] All I need to know is what a 440 would be set at. I understand that clockwise is advancing and counter clockwise is retard. I just need a little guidance. If you could ponit me to the right direction, like a webside, video, or something. Input always helps too =] Thank you for your time. Mason. |
#2
|
||||
|
||||
Are you referring to the Coronet 440 or the 440 engine? The 440 engine wasn't available in the Coronet that year. The Coronet 440 was a model designation, irrespective of powerplant.
Is your distributor in the front or rear of the engine? |
#3
|
|||
|
|||
'70 was the last year of the Coronet 440 so I'll assume it's a '73 Coronet with a transplanted 440.
The initial ignition timing varies with the distributor but 5° BTDC is a good place to start. |
|
|