|
#1
|
|||
|
|||
Does anyone have any tips on how to sand, paint and of refinish aluminum rims at home? They are 1980's charger rims with a little corrosion but otherwise in good condition, however they need and overall facelift. I'm on a really tight budget so any hints and advise is appreciated...thanks
|
#2
|
|||
|
|||
I had a charger with the same problem
i used steel wool and a wire brush with a degreeser u can use brake parts cleener to the paint i used was a dupont mix thats reely thick that should get the aluminum back into shape |
Thread Tools | |
Display Modes | |
|
|