|
#1
|
|||
|
|||
W-9 guys .... Help ?
I am priming the oil system on my motor....48 degree w-9's with T&D 1.6 rockers.....Smith pushrods with .040 resttrictors and CS roller rockers with I believe the .210 offset intake push rod cups.
I am getting oil except to the intake rocker. Plenty at the lifter , the valley fills up easily. Oil at the exhaust retainers , so I am getting it everywhere it needs to be on that side. But on the intakes , I am not even seeing evidence at the pushrod cup on the rocker arm. The adjusters are within T&D's recommended distance.....not smack dab in the middle of perfect , but well within their tolerance. I am thinking it has to be the lifters....the odds are that eight intakes would all be plugged is slim. They are .040 shorter that the exhaust and I did not try to see if they would pass air before install....that's probably the first check. Just wondering if any of you have seen anything like this. Any ideas ? Thanks. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HD Guys what do you think? | NewBlackDak | Ram Truck Chat | 4 | 09-29-2005 01:09 AM |
Mopar Guys are cooler than brand-x guys | jleilich | Off-Topic Forum | 6 | 12-21-2003 12:20 AM |
hey b.c. guys... | brent vendsel | Off-Topic Forum | 5 | 06-03-2003 12:05 AM |
Hey guys | 528HemiDart | Drag Racing Forum | 1 | 03-28-2003 08:51 PM |
hi guys | disavowed | Ram Truck Chat | 0 | 05-02-2001 01:04 PM |