|
#1
|
|||
|
|||
My new pan on my 400 hangs about 2 inches below the K member on my 73 sattelite!! I new this might be a problem on the street so I was wondering what other people do? Do you build a skid plate? I have scraped the k member before going about 30 over those new wide speed bumps but If I do it now I loose a 150 dollar pan and 7qts. I will problably also need a safety switch. Any tips/comments? Thanks
|
#2
|
|||
|
|||
A buddy and I had to walk home almost 20 miles a few years ago after we tore the bottom off of a Moroso pan while street racing his 440+6 RoadRunner. That was one long night! If you're going to hang the pan down there that far you had better crank up the T bars, or build a skid plate, or else watch what you run over!
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
E Body Hood Clearance | toad490 | Performance Talk | 1 | 04-22-2006 11:06 PM |
A-body clutch fan clearance | cutting torch | Performance Talk | 21 | 12-19-2004 12:22 AM |
Headers and clearance issues for A body's. | 73calroadrunner | Performance Talk | 7 | 04-08-2004 12:32 AM |
A Body clearance help | Doug Wilson | Performance Talk | 19 | 02-21-2002 04:19 AM |
Mildon 3/8 Oil Pickup | Chris A | Performance Talk | 2 | 01-26-2000 01:03 AM |