|
#1
|
|||
|
|||
Wanted a 340 4340 billet stroker crank. 4" or bigger, may consider one that needs work or repaired. Please email or call 641-624-2101 (IOWA).
Thanks Paul |
#2
|
||||
|
||||
hi paul. go to www.hughesengines.com or go to mopar perormance catalog on line. go to the top of this forum and you will see it. just click on it .
larry ------------------ |
#3
|
|||
|
|||
Crankshaft specialties
Memphis Tn. ------------------ Happiness is stomping a BBC with a 318 Mopar http://www.4secondsflat.com http://www.4secondsflat.com/fishfry1.jpg |
#4
|
||||
|
||||
Hi Paul! I'm from Iowa to. Which track do you race at? Why do you want so much stroke? If you want, Mopar Performance has a 4" stroker crank just made for your motor. I personally am very pleased with my 3.79 stroker. I used a 20 over 340 block. I used eagle rod stock lenght 6.123. J & E flat top Pistons that we pushed out of the block 18 Thousands. This makes it 13 to 1 compression. This helps make the motor think that my open chamber W-2 heads are closed chamber. My car weighs 3400 lbs with me in it and I have only 4 passes on the new combo and have already went 10.70 @ 126 mph 1/4 and 6.76 @ 102 in the 1/8. Right now the only problem I have with mine is my carb shop 750 runs out of poop at 6200. The cam I have should run to 7000. I race Tri State mostly,but do get to Eddyville once in a while. You can see my mopar or no car at my web site. Later Ed
------------------ Mopar or No Car at www.geocities.com/intimidator162000 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
379 stroker crank | daryl2399 | Drag Racing Forum | 3 | 12-21-2011 05:23 PM |
400 stroker crank | Sam Davis | Rear Wheel Drive - Parts for Sale | 1 | 11-25-2002 10:10 AM |
Stroker crank | thegrump | Performance Talk | 11 | 01-06-2002 09:22 PM |
Eagle 'RB' 4.15 Stroker Crank VS. MP 4.15 Stroker Crank VS. Welded Stock Steel | krownman | Performance Talk | 5 | 03-04-2001 11:47 PM |
new 360 stroker crank | 360duster | Performance Talk | 1 | 02-05-2000 01:36 PM |