|
#1
|
|||
|
|||
I have just aquired a 77 volarie, free. And wanted to pu the front disc brakeson my 69 Cuda. I know that the bolt pattern is 5 x 4 1/2 and that i need to get the master and proportioning valve.Are the ball joints different ? Will this work?
|
#2
|
|||
|
|||
You'll need the upper and lower ball joints out of a 73 or later A-body.I'm not sure what the Volare has for calipers and such,but most of that stuff will work.
|
#3
|
|||
|
|||
Thank you Christopher, Thats what I wanted to know. Now to get busy.
|
#4
|
|||
|
|||
Joe, I made a mistake in some of my info I gave you.You'll also need to get a set of B-body spindles as the F-body ones apparently won't work.As far as upper ball joints,I'd get the whole upper control arm from the 73 or later A-body too.Sorry for the mistake,but when I'm wrong I try to correct it.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A body brakes | pentastarguy | Restoring your MoPar (Tricks & techniques) | 4 | 10-02-2004 04:50 PM |
f-body to a-body brakes? | 360Swinger | Performance Talk | 23 | 11-22-2003 11:56 PM |
Front Disk Brakes: B-body vs E-body | onebad440 | Performance Talk | 9 | 01-24-2003 12:49 PM |
A-body brakes | billy frank | Performance Talk | 2 | 12-09-2000 07:42 PM |
A-Body Brakes? | SJS440 | Performance Talk | 3 | 12-28-1999 06:22 PM |