|
#1
|
|||
|
|||
I have a 360 4 barrel that I want to fix up. I am shaving the heads .030 and putting on headers. Is there anything else that I could do that will not cost alot and will not take that much time?
383boy |
#2
|
|||
|
|||
A healthier cam and roller timing chain would be nice. While the heads are of you might consider doing some pocket porting; a few hours with a die grinder can give good results. Maybe a performance curve in the distributor would be nice too.
|
#3
|
|||
|
|||
wendage tray ,lifter valley splash pan ,2.02 valves, chrome ECM,index spark plugs,elec. cooling fan will free up some H.P under drive pulleys, elec.fuel pump,K.N air filter,750VAC.sec.including what DartGT66 says all free up some extra ponyies!!
------------------ MAXXX |
#4
|
|||
|
|||
Yeah. My daily driven 360 felt like it picked up 10HP after I shortened the advance slots some and used one med. spring and one light one. All in at 2200RPM. Actually slowed the advance down from 1900rpm and the car got even more low end torque! Cheap and easy.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Power Programmer / Power Chips | ehostler | Diesel & Turbo Diesel Chat | 12 | 10-12-2006 11:21 AM |
Power or No Power Brakes | sfkennedy | Performance Talk | 13 | 02-19-2004 02:13 PM |
Adding power windows and locks to non power?? | zig | Dakota Truck Forum | 4 | 02-05-2003 07:49 PM |
Power In but No Power Out at Ignition Switch. | Leo Phelps | Ram Truck Chat | 6 | 12-30-2002 07:05 PM |
power window/power lock wiring | denros | Ram Truck Chat | 0 | 04-26-2001 12:49 AM |