Cam button for roller cam in my bb?

[mopardude]

I aM RUNNING A ROLLER cam in my bb and i am using a double roller timming chain.Who makes a cam button that will fit properly for a 3 bolt cam? whats the brand and part # a friend has a comp cams nylon pn 206 i think but he said it wouldnt work in his i havent tried it yet though what do u think??

[DartGT66]

You have several options, I think all cam buttons are for three bolt cams. I'm currently using a nylon button, previously I have used a Milodon aluminum cam button, and one that had a built in torrington bearing, don't know the manufacturer. They have all worked and in all cases trimming of the cam button or the timing chain cover was necessary.

[Stan Cameron]

My Pete Jackson gear drive came with the button that has a torrington bearing. I think you can buy that part from Pete Jackson.

------------------
69 RR 426 4bbl 727 9.88 @ 135 best so far.
79 Lil Red Express.
96 2500 Ram 5.9
99 Durango 5.9

[Beeracuda]

We use a Cloyes Hex-Adjust. It uses socket head bolts, so there's no problem. This thing makes degreeing the cam simple. I use it along with the Powerhouse tool that goes in the lifter bore and it's done in 15 minutes. It took longer to set the camshaft end-play with the button.

------------------
Monty Brown
74 Barracuda
446 / PG
10.23 /134