|
#1
|
||||
|
||||
I am putting a 440 into a Fury III. Can anyone recommend what headers I should buy? Also should I go for 1&7/8 or 2" primaries. The car will be used for street and strip action.
|
#2
|
|||
|
|||
...If you are using a hydraulic cam and standard size valves I would use a 1.625 tube size such as Hedman makes. You can get them at Jeg's, Summit, or just about anywhere.
|
#3
|
|||
|
|||
The problem with a C-body is that you don't have much choice. B-body headers will not fit without modifications and I think the only header currently available is the Hooker Super Comp with 1 3/4" primaries. I don't know of any other BB headers for any body style with smaller than that primaries. The problem with the Super Comps is the price, they are expensive. Propably 3-400$, but the fit is good and they do not hang very low, so they are good for street use too.
|
#4
|
||||
|
||||
Hedman B body hedders fit beautifully in a "C" body. They hang high and have lots of clearance. I ran that combo.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
header tip...? | powerdodge | Ram Truck Chat | 0 | 11-13-2003 06:11 PM |
Best fit Header R.R. | whiteowl | Vintage MOPAR chat | 3 | 09-11-2002 11:32 PM |
need some header help | skyhawg | Performance Talk | 5 | 07-15-2002 05:06 PM |
Header or not to header | dram1500 | Ram Truck Chat | 13 | 08-23-2001 01:45 PM |
Which header should I get??? | hill360 | Ram Truck Chat | 16 | 10-01-2000 02:42 AM |