Your in luck!
Not only do I have a set of 273 heads, I have a set of kick A Ray Barton prepared 273 heads. These heads are off my 68' 273 that Ray Barton built 3 years ago. Since then I put on a set of 360 heads that I am having built because I am going more seriously into the racing end of my Dart. With a mild cam (214.5 duration at 50) the engine had 300 horse and 311 foot lbs. of torque. These heads were treated to Ray's bowl blending and port matching to a four barrel intake. The seats were also resized for 1.88 / 1.60 valves with a 3 angle valve job. They were also traeted to bronse guides and brass freeze plugs. The push rod holes were enlarged to be able to run 1.6 rockers if need be. These heads have a total of about 1000 miles on them over the past 3 years. If you want to see I have all the paperwork from Ray Barton's to prove of his work. If you are interested in the heads please E-mail me at Blondi2870@aol.com or phone me at (412) 372-0725. I'm from the Pittsburgh area so if you want to see them your welcome to. Also, the 68' heads will have the 68' to newer intake bolt angle, the older 273's used a special intake that bolted to the heads a little differently tha yours or I's. So, your intake will bolt right up to these heads.
[This message has been edited by Steve (edited February 19, 2000).]
|
02-19-2000, 08:21 PM
Similar Threads
Linear Mode
