|
#1
|
||||
|
||||
I am wondering how wide an E-body rear end is. Backing plate to backing plate measurement would really help or how much wider is it than a B-body. I need a wider rear end for my Volare. It currently has a B-body 8-3/4. I am looking for 3/4 to an inch a side. I know the perch mounts must be moved. I just stuffed 295/50R15's under the
rear and miss judged the back spacing. Any help will be appreciated. Thanks Glen440 |
#2
|
|||
|
|||
E-body 8 3/4's are 56.5" backing plate to plate.62-70 B's are 55".71-74 B's are 57.8".A-bodies are 51.4".71-74 B staion wagons and C-bodies are 59.2".
|
#3
|
|||
|
|||
I just swapped in a B body housing to my 70 Cuda to get a little extra tire clearance on the outside sidewalls. I gained about 3/4" of clearance on each side. I did this on the last Cuda I had also. If 3/4" more clearance on the inside will solve your problem and you are running a stock B body housing, then an E body housing will solve your problems. (Of course you'll have to use the e Body axles too.)
------------------ 1970 392 Hemi Cuda |
#4
|
||||
|
||||
Does anyone have the drum to drum and spring perch measurements too?
I bought a project car, '73 Barracuda and the 8-3/4 in it is 61.5 drum to drum, the spring perches measure 41.5 inside, 46.5 outside (44 center). I don't know if it is the original rear or not. ------------------ 440 Jim E-Body Fish [This message has been edited by 440 Jim (edited April 28, 2000).] |
#5
|
|||
|
|||
Spring perch center to center;62-70 B-44".71-74 b-47.3".E-bodies-46".C's and B wagons-47.3".A-bodies-43".
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How wide in an A body? | 71dart666 | Wheels & Tires Forum... | 4 | 08-29-2002 10:33 PM |
A Body Sm Bolt Rally Wells, Widend To 7" Wide | duster360 | Rear Wheel Drive - Parts for Sale | 2 | 05-07-2002 07:29 AM |
How Wide of a Rear tire can i get on my 71 Challenger | PINK71T/A | Wheels & Tires Forum... | 1 | 05-26-2001 01:06 PM |
How wide is your rear end? | Brian C | Performance Talk | 8 | 02-01-2001 10:11 AM |