|
#1
|
|||
|
|||
I was looking at a 340 motor w/edelbrock 650 cfm carb. 340 torker intake, bored .30 over, 10.5 to 1 compression, competition .480/.280 cam. Engine is unassembled, has never been assembled. I am wanting to purchase this, but was wondering how much it is worth, any ideas? He also has, 2.02 J heads w/triple angle valve job, bronze valve guides. How much would the J heads be worth? Any advice would be of great help.
[This message has been edited by Shatar (edited May 02, 2000).] |
#2
|
|||
|
|||
Hellllooo, Is anybody out there?????????
|
#3
|
|||
|
|||
If I had it all here to look at and everyhting looked good and still in good shape and what I wanted, I'd be willing to give the guy $1200.00
But what do I know. Mopar stuff is hard to get around here so I'd be willing to spend more than others would. How much does the guy want for this stuff?? ART |
#4
|
|||
|
|||
Personal opinion....any time you buy a motor you're throwing dice. There are alot of so called experts out there that know all the words but dont know what they mean. Initally it does sound like a good deal as long as its not too hacked. As long as your good with a wrench I say Lay out the cash in front of his face and give him a lower offer and take it right then. If you plan up front that something will need %$#@ing with then you probably wont be too surprised and make out well. If the J heads are just redone completly they may be worth anywhere from 300-500 depending if thats the head you are looking for. FYI....these are the same as the X heads except I believe the chamber volumn is 2 cc bigger. good luck....DAVE.
------------------ |
#5
|
|||
|
|||
Thanks Dave and Art for responding. As for your question Art, this guy wants $600.00 for the motor but it has a lot of extra parts, like a motor stand, ARP bolts, new water pump, 7 qt oil pan with high volume oil pump, two sets of valve covers, electronic ignition conversion kit, and $500.00 for the J heads. He also has a 8 3/4 pig w/391 gears, 742 casing for $150 dollars. So I guess this isn't such a bad deal after all?
[This message has been edited by Shatar (edited May 04, 2000).] |
#6
|
|||
|
|||
hey
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I need advice | 97 Ram | Ram Truck Chat | 1 | 01-07-2008 09:51 PM |
Asking for Cam advice | mrbill426 | Performance Talk | 13 | 05-25-2004 12:00 AM |
360 advice. | CW25 | Performance Talk | 10 | 09-03-2002 09:15 AM |
Amp/Sub Advice | RedRam360 | Car Audio Forum | 8 | 07-28-2001 12:53 AM |
need some advice... | RufusTheRam | Ram Truck Chat | 4 | 04-24-2001 04:04 PM |