|
#1
|
|||
|
|||
...Is anyone out there using the 312X.590 M-P solid cam? Please post your opinions and any thing to watch for during installation.
|
#2
|
|||
|
|||
I got one in my 70 S/Pro Challenger it's the best solid cam I used yet just follow the instructins the mopar book says put it in at 104 degrees I put mine in at 106 degrees you can use your own judgement depends on what gears you got in the rear end
|
#3
|
|||
|
|||
I have been using that cam for about 8 years. I think it is great for racing but doesn't have much torque below 4000 RPMS, but after that it comes on very strong. I personally would not recomend it for the street, and for the track you better have a 4 speed or very high stall converter. Just my thoughts. AJ
------------------ '98 Ram 4X4 V-10 '86 Daytona 498" Blown/Injected '71 Cuda 340 W-2 heads, 4 speed |
Thread Tools | |
Display Modes | |
|
|