|
#1
|
|||
|
|||
I was using a Holley 600vac. #1850 on a warmed over 360ci. Since I was somewhat concerned with MPG and driveability I thought this was the right choice. Man was I wrong. The 600 was running lean so I was going to jet it up when I spotted this old 750vac. #3310 hanging on my garage wall. Got a BG rebuild kit and this thing is awsome! Way better power, throttle responce and probably MPG.
I am having one little problem though. The 600 has an electric choke that uses an internal vacuum source. The 750 has no provision for it that I know of. Can I swap this ckoke over to the 3310? I know Holley sells a different choke for each aplication (int,ext vac. source). ------------------ Stoplight action in a street fightin' '85 M-body 360ci. or '68 Hemi GTX 4spd. |
#2
|
||||
|
||||
As far as I know the 3310 has the vacuum port you need for the choke. My freind ordered one for his 3310. I found the port on the side and it had vacuum. The port you need might have a screw in it right now. Take off everything ahead of the vacuum diaphram for the secondaries. One of the tapped holes should have vacuum.
Glen440 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Would A Holley 45-224 choke kit fit a Speed Demon ? | choper | Performance Talk | 0 | 04-17-2008 04:55 PM |
TQ electric choke question | MY340 | Performance Talk | 14 | 01-16-2005 08:26 AM |
Manual Choke kit for Holley on Challenger | Olle B | Performance Talk | 3 | 06-13-2002 01:39 AM |
Need Holley Choke Pull-off spec. | Hemi Mike | Performance Talk | 4 | 02-22-2001 10:45 PM |
New electric choke for Holley #3310 | Hemi Mike | Performance Talk | 3 | 12-06-2000 07:23 PM |