|
#1
|
|||
|
|||
I am building a 440 that is 060 and need to know how much my block has been decked. The motor has TRW 10.5 pistons that are 032 in the hole. I am wandering how much the block has been decked. Thanks for the help Ron
|
#2
|
|||
|
|||
Is there a way to measure Deck Height without taking it to a machine shop atleast to get a rough measurement?? maybe to see if the block is square aka measure front both sides and rear both sides.
Christian |
#3
|
|||
|
|||
i had trw flat tops,idont know if they would be the same but with no deck cut you get .089 to .092 if that helps.
|
#4
|
|||
|
|||
(STROKE/2)+ROD LENGTH+PISTON COMPRESSION HEIGHT+DECK HEIGHT=BLOCK DECK HEIGHT.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
360 Deck Height | it's all dodge | Performance Talk | 6 | 09-02-2007 10:00 PM |
Need help with 440 deck height | dusterrcr | Performance Talk | 1 | 05-11-2006 06:10 PM |
Deck Height Even Or Below | DIRT DODGE | Performance Talk | 2 | 11-05-2003 08:30 AM |
340 deck height | B.Tallent | Performance Talk | 4 | 04-14-2002 11:43 PM |
Deck height | Duster440 | Performance Talk | 7 | 03-17-2000 07:41 AM |