Do I need a to knock out a hole for a PCV? - Moparchat

bluesfool · #1 08-07-2000, 01:47 AM

I just installed a set of MP valve covers on my 383, and stupid me didn't punch out the opening for a pcv valve. So right now there is one opening on each cover and they are sealed by the oil caps. Do I need to take a cover off and punch out the tab for some pressure relief? What will happen if I run the engine w/out any relief for oil pressure?
Thanks

slepr1 · #2 08-07-2000, 03:24 AM

Use one of the openings for the pcv valve. Insert a gromet to fit the pcv. No need to punch anything out. You only need one opening for oil anyway.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
odd knock	fat 360	Jeep Chat (Wrangler, Cherokee, etc...)	4	07-10-2009 12:52 AM
Knock - Knock - NHRA .....anyone home ??	Mister Fiberglass	Drag Racing Forum	30	06-07-2003 04:20 PM
Spark Knock	CLAY TAYLOR	Dakota Truck Forum	1	05-16-2003 09:25 AM
5.9 Spark Knock	Motorsport	Ram Truck Chat	9	01-05-2001 02:41 AM
spark knock	keith3123	Ram Truck Chat	5	08-01-2000 01:27 PM