Well I just fired up my 383magnum for the first time since the resto began, wow! Once I got the vacuum advance to work w/low vacuum, 12in it seemed to come alive. My question is this, the cam in the car was like new but was an old grind 20yrs? The cam gear was stamped CC300h8. I assumed it was a comp cam as their #'s were close but did not include 300, their catalogue jumps from 295-305. If in fact this cams specs fall in between these 2 it is pretty radical right? It has a very lumpy idle but wakes up in mid range. Have any of you long time Mopardudes used this cam? Do you remember the specs? Comp tech guys were not able to help. I'm just hoping its not too much for the street. Thanks in advance for any input.
Car has Edel 750, Edel perf rpm, 1 7/8" headers, heads shaved .030, mp elect dist, accel ss coil and 8.8 wires, 2800 dynamic stall and turbo action shift kit, milodon 7qt pan w/tray and 6qts oil, hi volume fuel, water and oil pumps. I know it will need gears and will be installing 3.91's or 4.10's. thanks again <><
|