Cold Air intake is complete

[Kevin_Rants]

Last weekend, I finished building my cold air intake with the 9" Intense Performance Power Stack filter (red), a 3" mandrel bent aluminum exhuast pipe (painted with Duplicolor ceramic based aluminum high temp paint) and a painted airhat (with Duplicolor ceramic based Chrysler industrial red paint). I also built a support which attaches to the fender so it is not hanging like the Instense Performance system.

How do I post the pictures in a message? I can get the pipe part number if anyone would like. Here is the link for the pipe I ordered:
http://www.jcwhitney.com/item.jhtml?ITEMID=4055

[RonWilson]

Kevin- Sounds awesome! Lets get those pic's up here!!

To post the image inline, just use the IMG tag as follows:

Lets say the image is at http://www.ron-wilson.com/images/name.jpg

You would place the tag [ i m g] before the http and [/i m g] after .jpg. That would display the image inline. Remove the spaces I inserted between the letters img and /img. I had to do that so you can read it here!

Just replace address with the location where they are kept and use the file name instead of name.jpg name.

Also check out http://www.moparchat.com/forums/misc...&action=bbcode

If ya need more help, just lemme know!

Ron Wilson

[Kevin_Rants]

WILCO, just need to get the picture disk from Walmart still. I don't own a digital camera yet so I still have to do the picture disk thing. I don't have my own website either so maybe I can email them to you or someone and then do the link.

So far, MPG seems to be better and the performance is great.

[RonWilson]

No problem. Just attach them to an e-mail to me! Can't wait to see it!


Ron Wilson

[Kevin_Rants]

Had to test the picture thing.

[RonWilson]

I think the image tags are still turned off right now.......

Ron

[Kevin_Rants]

http://www.jcwhitney.com/item.jhtml?ITEMID=4055 This is the link for the pipe I ordered.

I also used a 3" rubber connector with 2 hose clamps from the Lowes plumbing section and a 3" PVC pipe hanger which I fabricated into a mount using stud that previously secured the bottom of the original intake.

Pictures will be coming!

[Kevin_Rants]

http://rantsnc.homestead.com/durango.html

here is a picture of my intake.

[RAM MAN]

looks great