Mopar Performance Roller Lifters

[JVMopar]

Has anyone used Mopar's Roller Lifters? And can you run roller lifters on a hydrolic cam?

[Reddawgy]

Im not a pro, but the only roller lifters i have seen use a matching roller cam. I don't use mech lifters si i haven't noticed, but all the rollers i have seen were hyrdrolic. The first point is probably ,ost significant though. Good luck.

[fast68plymouth]

if you want to use a hydraulic roller cam, you need hydraulic roller lifters. you cannot run hydraulic roller lifters on a mechanical roller cam.
Crane has come out with some new hyd roller cams for both BB and SB mopars, and they have the lifters too.

[rumblefish360]

Hyd. lfiters w/ hyd. cam
mech. lifters w/ mech. cam
Roller lifters w/ roller cam
Mix them up and you have trouble. DON"T FOOL AROUND.

[SUN RA KAT]

The MOPAR Magnum R/T cam package comes with roller lifters, R/T cam,& lube. The other MOPAR cams require a seperate purchase of the lifters.

------------------
Kenny

2000 Intense Blue Ram 1500 Quad Cab Sport SLT+, 5.9 L, Auto, 3.55 Sure Grip, Service Group (big battery, transmission oil cooler, & heavy-duty engine cooling), MOPAR tonneau, MOPAR bedliner, MOPAR Ram mudflaps, MOPAR side moldings, Flowmaster 50-series SUV muffler with heat shield, JBA silver ceramic coated headers, Quick D throttle body, K&N Gen II FIPK, MOPAR PCM, 180 degree thermostat, R/T Cam Package (cam & lifters), new valve springs & retainers, and new timing chain, and sometimes a full tank of premium gas.

Did I mention it was INTENSE BLUE?