|
#1
|
|||
|
|||
does anyone know how to get a hold of arrington manufacturing
does anyone know how to get a hold of arrington manufacturing
i am looking for a place to get winning late model engines so i can beat those high dollar chivies and ferds |
#2
|
|||
|
|||
I responded to you under the Nascar section but that was before I saw you wanted a Townsend car. I assume you are wanting to race a pavement late model.
Arrington is in Martinsville, Va. But, I suspect he is only interested in the latest Nascar engine (R5/P7) combinations. And to my knowledge they are only available as lease engines. Stanton in Nickolasville, Ky is another good builder of Mopar engines (Kinser, Blaney, Francis) but they are all aluminum, balls to the wall dirt engines. Ram Automotive in Lynchburg Va. is probably your best bet as a engine source. He has a lot of all iron experience and apparently his engines are competitive. Don't know about prices. If you are planning to race the Nascar Late Model circuit, their 350 CFM carb rule is tricky and causes a lot of dyno R&D time. That really drives up to cost on at least the first engine. By the way, if you want a good, reliable race engine; GM, Ford or Mopar will all be within a few $ of each other. The blocks, cranks, rods, cams, heads, valves, etc. are all the same price regardless of brand. |
#3
|
|||
|
|||
arrington manufacturing
i belive he used to make engines for dodges for any kind of racing right down to the stock ones. sad to hear he doesnt do it anymore.
how exactly can i get a hold of the other builders you were talking about. |
#4
|
|||
|
|||
Call telephone information in Lynchburg, VA for Richardson Automotive Machine(RAM). Bill Richardson is the owner and will probably answer the phone.
|
#5
|
|||
|
|||
Ram Racing
The phone numder for ram is 804-846-0043
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
tracing the manufacturing | aceofspades | Ram Truck Chat | 1 | 04-25-2014 01:11 AM |
Surging China costs forces some U.S. manufacturing companies back home | Stoga | Off-Topic Forum | 25 | 07-07-2011 07:44 AM |
400 hp 318 and how would it hold up in my 88 dak??? | emt_156 | Dakota Truck Forum | 5 | 03-03-2003 10:26 PM |
does anyone know how to get a hold of arrington manufacturing | iron_will | MOPAR NASCAR! | 3 | 07-16-2001 11:32 AM |
Aluminum main caps/Manufacturing? | Challenger | Performance Talk | 1 | 02-01-2001 08:52 AM |