|
|
|
|||||||
|
#1
07-18-2001, 02:26 PM
|
||||
|
||||
distributor ?
Whats the total mechanical advance for a stock 318 distributor? I don't want vacuum advace nor total advace just what the advance weights themselves put out in total advance all by themselves. thanks in advance, HaHa! If there's advance weights to look for whats there numbers? Or whats optimum for a 360, A.T. 2BBL? Here's what I want a total advance in degrees at 49-50 thats including vacuum at part throttle and 35 degrees at WOT or all in by 3000 RPM. Do these figures sound good. 85 Dodge fifth Avenue, 360, 2 bbl Holley, A.T. all stock except GM HEI module firing the coil everything else is stock.
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| distributor help | smallblockswinger | Vintage MOPAR chat | 9 | 08-12-2007 10:13 PM |
| 400 distributor | bbaspense | Rear Wheel Drive - Parts Wanted | 4 | 08-06-2005 08:31 PM |
| 258 HEI Distributor Help!!! | FASTRNU | Jeep Chat (Wrangler, Cherokee, etc...) | 1 | 09-23-2002 12:51 PM |
| 383 distributor MSD or MP? | grancpe | Restoring your MoPar (Tricks & techniques) | 3 | 11-17-2001 09:39 PM |
| Is a Lean-Burn distributor the same as a normal electronic distributor? | goose | Performance Talk | 6 | 03-27-2001 01:32 AM |
Linear Mode
