|
#1
|
|||
|
|||
super stock springs B body
i put 440+6 in making 600 hp and 602 torque ,now i need to work on other end. where do you buy these and what other pieces do i need. i see i need front brackets,what else.how much do they run for complete set up. thanks walt
|
#2
|
||||
|
||||
If you are looking for strictly bolt in stuff, you'll need an adjustable pinion snubber and rear shocks with a minimum extended length of 24". There are some low cost modifications you can make to the front suspension that will help the chassis work better too. There is a summary of the Direct Connection Race Bulletins #15 & #30 on my Mopar website, maybe you will find some of the info useful.
http://www.geocities.com/musclemopar...suspension.htm |
#3
|
|||
|
|||
thanks for reply,but what i was really looking for was where the best and cheapest place to purchase super stock springs and hangers ,U bolts and shocks and to know if i will need anything else.
i decided i probably should put some frame connectors in also. |
#4
|
||||
|
||||
Help
Check with Mancini Racing they are found in most mopar mags like Mopar Muscle they are pretty cheap. Koller Dodge also has some specials too. I think Mancini will throw in new shackles or bolt kit one of the 2. Hope this helps.
|
#5
|
||||
|
||||
Mancini or Summit, both have reasonable prices..
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Leaf Springs, Super Stock or Stock | Leige | Performance Talk | 11 | 05-01-2007 04:41 PM |
Super Stock springs | cutting torch | Performance Talk | 16 | 02-23-2005 10:54 PM |
Super stock springs and relocation on a b-body | Juan Ramon | Performance Talk | 6 | 10-28-2004 10:28 PM |
Super Stock Springs | mopargator | Performance Talk | 20 | 02-11-2001 01:43 AM |
Super Stock Springs Help | little storker | Drag Racing Forum | 10 | 08-06-2000 10:49 PM |