|
#1
|
|||
|
|||
85 f/s ram slant 6. when applying my brakes toward the end of the stop one of my wheels is locking up. i think it is the passenger front.when inspecting the calipers and such every thing is good. the passenger side spins with little resistance. the driver front has a fair amount more of drag. i went ahead and replaced the calipers and bled all four wheels. it still does the same thing. could it be my master cylinder or porportioning valve? any ideas?
|
#2
|
|||
|
|||
Could be the rubber line on the Drivers side being worn and giving a little so not to actuate that caliper all the way. Also could be that the steel lines are clogged causing something to lock the passenger side wheel.
Just a few quick thoughts Christian ------------------ 68 'Cuda 383 Formula S recreation Working on adding EFI 69 'Cuda Race Parts Car 76 Duster 273 recent transplant 95 Neon 2.0 SOHC best of 16.96 84 Dodge Ram D50 transplanting 360 |
#3
|
|||
|
|||
My '72 1/2 ton did the same thing. After replacing the calipers and pads, it turned out to be the rubber brake hoses.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
brake problems | ram100 | Ram Truck Chat | 9 | 10-14-2010 04:33 PM |
brake problems | crc70 | Vintage MOPAR chat | 4 | 04-26-2004 12:12 AM |
Brake problems??? | BartRam1500 | Ram Truck Chat | 15 | 05-15-2002 08:08 AM |
brake problems | fastback340 | Diesel & Turbo Diesel Chat | 0 | 10-25-2001 09:04 PM |
Brake problems on an 84 w-250 4x4 | motorhead440 | Ram Truck Chat | 1 | 01-02-2001 06:41 PM |