|
#1
|
|||
|
|||
I have a Holley Carb with these numbers on the choke tower C3TE 9510-H LIST 2154-1 532
I would like to know any info about this carb..like what size. any help is appreciated |
#2
|
|||
|
|||
maybe there are some other numbers??..my haynes book doesn't list anything close..
|
#3
|
|||
|
|||
i see these numbers on the baseplate ,61945 and 12R5204B... i havent seen a Holley carb the same as this.. it has dual choke towers, one for the back barrels and one for the front. thanks
|
#4
|
|||
|
|||
That is wierd. Why don't you try contacting holley directly?
|
#5
|
||||
|
||||
Dual choke plates? Sounds like a Carter AVS.
|
#6
|
|||
|
|||
its not a carter.. its a holley.. its stamped all over it . I found some other numbers its a 600 cfm. Thanks for your help guys
|
#7
|
||||
|
||||
That sound like a weird carb you have there. Never heard of the set up you described. Can you tell me more about this Holley?
|
#8
|
|||
|
|||
Well i picked this Holley Carb up at a local swapmeet. I later found the numbers 1850 2 on the bottom of the base plate from that i found out on holleys website it is a 600 cfm. But i have never see a carb with these choke towers.. it also has some weird what looks like to me as a spring blowoff valve on the front choke tower... maybe its a marine application or something. The Carb also has dual Metering blocks and a balance tube behind the fuel line that runs from the from bowl to the back. if you want to see it.. i can send you some pics via email in a few days.
|
#9
|
|||
|
|||
I looked in my holley book and can't find anyting even close to the nunbers you gave (the SA designs holley book, not an offical one)
|
#10
|
|||
|
|||
Well i found the numbers 1850 2 on Holleys website and it says its a 600 cfm. but why it has 2 choke towers and the weird blow off valve deal.. i dont know yet.
|
#11
|
||||
|
||||
E- mail pics ...sure ...see if you can post them somewhere as well.
|
#12
|
||||
|
||||
HEY GUY SOUNDS LIKE YOU HAVE JUDGING FROM THE C3TE 9510 NOS.A 1963 FORD TRUCK (FACTORY INSTALLED)CARB.600 C.F.M..COULD ONE OF THE CHOKE TOWERS BE A GOVERNER?
|
#13
|
|||
|
|||
Mopar413 you are correct.. i wrote Holley and they told me that the carb i have is off a Ford Truck from the 60-69 range... as for the the dual choke towers.. maybe it is a CFM govenor. still trying to get pic for you guys to see.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Holley Carb ID | 63Fury | Performance Talk | 6 | 01-29-2008 02:00 PM |
FS: Holley 750 CFM Carb | rebby | Parts for Sale | 0 | 12-10-2002 02:58 PM |
2 x 4 Holley carb ? | 6 packin | Performance Talk | 9 | 11-04-2002 02:02 PM |
need help with a Holley carb... | Mopar_Maniac | Performance Talk | 9 | 07-10-2002 12:20 PM |
Holley carb #'s | COLORMECLONE | Performance Talk | 3 | 02-09-2001 09:48 PM |