under chassis bigblock a-body headers

[prostreetchallenger]

need to know of some manufacturers of bigblock under chassis headers for an a-body with 440, just doing some investigating. might be building a 440 this winter for a demon.

[kekoakeakane]

If you haven't already been there visit bigblockdart.com @ http://www.bigblockdart.com/ . There is just about every piece of information you need for a big block A-Body swap. I don't personally know about header issues for a bibblock A-Body, but the collector flange on the Hedman's on my 68 RR 440 hit the torsion bar on the passenger side. Nothing a 5" grinder couldn't fix, but what a pain.

[kingjr]

I've got the Husler fenderwells on my late model A body. They fit good and work great! Can't turn the steering wheel to far though. DusterDave got a set from Muzzolini? out in CA, they looked real nice as well. <><

[Darn Dart]

CPPA/TTI has a beautiful set of 2" all chassis headers to fit a 440 into an A-body. I have a set still in the box, cause someday I'm gona build a 440 A-body also. Check out www.ttiexhaust.com