Can't remove stuck brake rotor

[varnk]

I have a 96 Chrysler Seibring.

I need to replace the brake rotors on the front, but cannot figure out how to get the rotor off. The rotor won't budge. Is there some technique or tool that I need to get it off? There does not appear to be anything holding it on, but it absolutely will not budge. I have tried hammering it, but still no luck.

[George G. Leverette]

Sometimes there is a little washer type retainer on one of the wheel studs that should be removed. I reall have no clue, and would recommend a quick trip to the library reference section for the procedure or a call to the dealers for removal instructions.

[Hammer 74]

Call the dealer or better yet call a Midas or shop that only does brakes. They usually know right away what you are talking about from experience. Good luck.