|
#1
|
|||
|
|||
I have a 69 383 with a 292 dur / 509 lift cam in it and I would like to know if there is any way I can tell if the springs are stock? (I would hope not).
------------------ 1969 Road Runnner Run's like the wind...Fast!!!!!! |
#2
|
|||
|
|||
The stock springs unloaded you could squeeze with your hand.
The p3690933 Springs are a thick wire in the spring coil. The stock springs is actually wimpy in comparison. Also look to see if you have dampners inside your springs most stock heads did not have dampners inside the springs. If you have dampners inside the springs you most likely have non-Stock springs. Christian ------------------ Http://ThunderRacing.Knudstrup.net/ 68 'Cuda 383 Best of 8.363@83.78 in the 1/8mile which is a mid 12 with a 1.89 60ft Formula S recreation not original but making like they should have at the factory) Working on adding EFI 69 'Cuda Race Parts Car 76 Duster 273 recent transplant 95 Neon 2.0 SOHC best of 16.96 84 Dodge Ram D50 transplanting 360 |
#3
|
||||
|
||||
If they float, get new ones.
------------------ Nitro 69 Coronet 440 90 W250 4x4 00 Avenger ES |
#4
|
|||
|
|||
Well, it sounds like if the springs are single's, they are stock. If they are doubled up, then not. I will have to look the next time I have the covers off. It runs great and strong but, the 3:23 rear is holding it back. I will be changing it to 3:91's in the spring. It a 8 3/4 sure cone type grip.
Thanks Guys http://www.hotrodder.com/nick |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Leaf Springs, Super Stock or Stock | Leige | Performance Talk | 11 | 05-01-2007 04:41 PM |
valve springs | darkside | Performance Talk | 4 | 10-10-2006 12:04 PM |
Valve Springs for Stock Heads | eggman2004 | Dakota Truck Forum | 3 | 12-06-2004 08:11 AM |
Max lift of stock 440 valve springs? | MoparButch | Performance Talk | 8 | 10-14-2003 06:15 AM |
Will Mopar 1.6 Roller Rockers Work with Stock Cam & Valve Springs? | Blue97Dak | Ram Truck Chat | 1 | 01-19-2001 06:45 AM |