|
#1
|
|||
|
|||
How much $/Mallory to balance SB 4" Crank?
Does anyone know haw much it will cost to balance a SB MP stroker crank? I was told by the shop it cost $2-300!! Thats not in the budget. Anybody know what it cost them?
Thanks, |
#2
|
|||
|
|||
cost
It costs me $175 form dampener to clutch cover. About another $150 to grind it.
|
#3
|
||||
|
||||
Cost is correct
First you have to consider the cost of the mallory/tungsten. It's not cheap! A regular balance job runs ~$125 here in Texas. Your quote is in the normal range for an internal balance.
|
#4
|
|||
|
|||
Looks right to me. Does that $200-$300 include grinding the crank?
|
#5
|
|||
|
|||
Thanks for the reply Nightri 1 and Doug,
Does a new crank require grinding? I thought a hone job would do it. Do they come un-machined?? Also, do you know what a stock 340 rod weighs? I know they are all different, but are there typical little end and big end weights?? I talked to SCAT Industries who manufacture the crank for MP and they say the bobweight of the 4" crank is approximately 1950-2000 grams. They said thats pretty high... They have a formula to determine the amount of mallory needed using the weight of the piston/rod assembly the bobweight of the crank. Sounds like MPs design specs aren't very close to actual use weights. but we'll see. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
s/b balance with eagle forged steel crank | jst1960 | Performance Talk | 14 | 11-20-2006 01:18 PM |
Vibration issue "Balance guru needed" | diego-ted | Performance Talk | 5 | 01-07-2005 11:13 AM |
SB Stroker crank balance | provan | Performance Talk | 3 | 01-24-2003 12:28 PM |
Crank Shaft Balance (440) | scott313 | Performance Talk | 2 | 01-24-2002 03:05 AM |
Engine Balance of 360 crank in Sept 2000 Car Craft mag | HankL | Ram Truck Chat | 2 | 10-02-2000 02:43 PM |