|
#1
|
|||
|
|||
i am running x heads with w2 vales&isky stock type rockers.my rockers shafts stans has been milled flat.can you use roller rockers with this setup.ps the head are old set of mullins real nice port job.
|
#2
|
|||
|
|||
Sure can. The early w-2 heads came from Mopar Performance without rocker shaft stands. Just make very sure that you check your rocker geometry to make sure you don't get anything into a bind. The old hippie hisselh.
|
#3
|
|||
|
|||
I think all the W2's come without rocker stands, except the 'Econo W2' heads. Just make sure your new rockers are the same length and has the same offset as your old ones.
|
#4
|
|||
|
|||
Where did you get the stock type rockers for your X heads? I have a set of X heads and cannot find stock rockers that will clear the larger springs. I really dont want to have to spend the extra money to get roller rockers just to clear the larger springs. If you can tell me where you got them, or if you have any you are interested in selling I am VERY interested. Thanks!
edc@cswnet.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
adj. rockers... | 74scamp | Slant Six Chat | 1 | 09-10-2002 02:23 AM |
Roller rockers vs regular adjustable rockers | 65 racer | Drag Racing Forum | 2 | 04-27-2001 12:49 AM |
Roller rockers vs regular adjustable rockers | 65 racer | Performance Talk | 2 | 04-26-2001 03:07 AM |
Cam and Rockers | Joe-Pa | Ram Truck Chat | 17 | 08-07-2000 06:28 PM |
New Rockers | Magnum Mike | Ram Truck Chat | 0 | 06-14-2000 06:13 AM |