|
#1
|
|||
|
|||
Wre can i get a conecting rod for a 360 magnum?
I need a press pin conecting rod for my 360 magnam motor were can i get on or who will sell me or donate one to me? I can only find floating pin not press pin!
|
#2
|
|||
|
|||
Magnum Rods
I think the rods and the cranks are the same between the Magnum engines and the older LA series engines. There was somebody selling parts of a 5.9L Magnum in the parts section. Maybe you can get a rod from him.
|
#3
|
||||
|
||||
All 360 rods are press pin from the factory. Most 340's were full floaters.
|
#4
|
|||
|
|||
Magnams and old a engines are way diffrent my bro has a rod from an old A engine and it is about 1 in thicker! Thanks for trying to help I need to get my engine done! I will look under parts thanks!
|
#5
|
||||
|
||||
I have a 74 360 that I put together and a 360 crate motor. The rods look almost identical. I would still try to find the correct rod for your application though if I was you. By the way, why do you need only one rod?
|
#6
|
|||
|
|||
magnum rod
we had two nuts holding the air cleaner stud in the carb it had been that way for years never had a problem.somehow the nuts came off and one went into number 3 cylinder and grenaded the piston into a million pieces and bent the rod in the process
|
#7
|
||||
|
||||
Sorry to hear that. I do the same thing with my studs. I think I will LockTite them in place. I have looked at a number of sites for a single rod for a Magnum with no sucess. I would say to call Mopar to get a replacement but the price may be steep. They do sell individual rods. I will keep looking.....someone has one for sale somewhere.
|
#8
|
|||
|
|||
magnum rod
i have a rman chrysler 360 magnum short block for sale. block ,
crank pistons with only 10 miles on it. includes oil pump also. diagnosed engine noise turned out to be loose converter bolt. mat seperate??/ best offer..email for more info |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1969 440 Magnum , 383 Magnum Fuel Line Size?? | Scatpack1969 | Vintage MOPAR chat | 2 | 04-16-2007 03:48 PM |
pre-Magnum 360 to Magnum 360 swap. What DOESN'T fit?? | tsteiner61 | Performance Talk | 9 | 10-16-2001 03:10 PM |
Were can i get 1 360 magnam conecting rod? | grossey33 | Ram Truck Chat | 1 | 10-12-2001 02:11 AM |
magnum/non-magnum push-rod question: | Swinger321 | Performance Talk | 1 | 08-22-2001 08:31 PM |
will magnum accessories fit non-magnum engine? | Tom Soby | Ram Truck Chat | 3 | 12-19-2000 12:16 AM |