|
#1
|
|||
|
|||
tip--use rear sway bar off aspen / volare to replace e-body swaybar now too wide with 3/4" offset spring kit. Both bars are 3/4" but the aspen / volare is about 3/4 narrower per side and has an additional dog leg bend. You'll need to get the frame mount brackets off the doner car and leave about 3/4 to 1" clearence under bracket when mounting on e-body(support bracket w/3/4" spacer block between bracket and frame) to frame. You may also have to adjust length of 3/8" bar from spring eye to bar eye to prevent aspen/volare dogleg from contacting frame/ floor pan. I did this mod several years ago but it worked fine--car is apart now so most of this is from memory.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
springs and sway bars... | underdog39 | Circle Track Chat | 4 | 06-02-2005 10:49 PM |
Offset rear output Transfer case???? | poseidon | Ram Truck Chat | 3 | 06-03-2004 05:16 PM |
Larger Front Sway Bar Or Rear Sway Bar? | GQMarinePilot | Ram Truck Chat | 6 | 03-11-2003 10:21 AM |
Rear axle offset | jamckimmey | Dakota Truck Forum | 31 | 03-22-2001 08:39 PM |
Update info on rear offset????? | SilverBullit | Dakota Truck Forum | 4 | 02-21-2001 10:45 PM |