|
#1
|
|||
|
|||
The other day i was going to test compression on my 340. i went to pull one of the spark plug wire boots off and low and behold i did the unthinkable. i did what i usually do. i grabed the boot of the wire and turned it loose and then pulled back (on the boot)and there it stood... the terminal end STILL on the spark plug.
DOES THIS DEEM THAT WIRE USELESS? CAN I REATTACH THE TERMINAL END TO THE WIRE? HOW? i just stuck the boot back over the end for now. WILL THIS STILL CAUSE IT TO MISS? help me please. they are 8mm high performance (expensive) wires so i dont want to buy a new set if i dont have to. THANKS ALOT. |
#2
|
|||
|
|||
OH YEAH... one more thing. I have a BB 400 (GM) sitting in my garage... if i stole a wire off of it (Regular Wires) will it work on my 340? will it be ok if i leave all the hi perf wires on except for that one or if i change one do i have to change them all?thanks again
|
#3
|
|||
|
|||
Just crimp another terminal end on the plug wire and slide the boot back over. Shouldn't have any problems.
|
#4
|
|||
|
|||
Depending on the manufacturer of the wire you may be able to re-crimp the end back on.
On the Jacobs wures the boost are siliconed to the wires so it is almost impossable to reattach them, but they have a lifetime warrenty. When I did this, I took the bad wire back to the speed shop where I got the wires and they just made me a new wire |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stupid move, Chrysler to kill off Grand Caravan | Stoga | Virtual Chrysler Shareholders Meeting! | 5 | 10-12-2011 10:39 AM |
Anyone have the 1970 cuda rallye wire harness part # ? | forspeed70 | Restoring your MoPar (Tricks & techniques) | 4 | 09-23-2006 10:58 PM |
Latest stupid GM P/R move | cudajimmy | Off-Topic Forum | 2 | 07-14-2003 04:58 PM |
Can't find a stupid part! | Hard_ChargerR/T | Performance Talk | 10 | 08-01-2002 02:55 PM |
I need to buy a really stupid part from one of you guys. | BlkBird | Dakota Truck Forum | 2 | 09-27-2001 05:58 PM |