|
#1
|
|||
|
|||
We are replacing intake gaskets on a pickup truck. Would like to port the heads since we are this close. Any templates available out there? It's a 94 5.9. Also, is there any way to check the injectors for wear. 140,000 miles on the truck.
|
#2
|
||||
|
||||
Porting templates are available from Mopar Performance, for the Magnum heads the part # is P4876413. As for the injectors I don't know how to check them, but I do know that guys on the Dakota mailing list have good results swapping in 19#/hr Ford motorsports injectors. You might also consider replacing the o-rings when you have them out.
------------------ 99 Dakota 5.2l 5spd 3.55LSD |
#3
|
|||
|
|||
Be sure to check your 1994 magnum cylinder heads for cracks between the intake and exhaust valve seats on cylinders #7 and #8 which are the two most rearward ones.
This web address has some injector checking and cleaning info: http://www.mikeponte.com/volvo/injectors.htm This post from the DML has info on what the injector flows should be like: http://www.dakota-truck.net/ARCHIVES/9810/1626.html |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
302 porting | highpie | Performance Talk | 2 | 08-18-2004 09:17 PM |
TB Porting | woodymotorsports | Dakota Truck Forum | 16 | 08-21-2001 06:37 PM |
TB Porting | woodymotorsports | Dakota Truck Forum | 18 | 05-11-2001 07:17 PM |
Porting W2 | Billydelrio | Drag Racing Forum | 1 | 09-24-2000 09:55 AM |
Magnum head porting templates | gouge97 | Ram Truck Chat | 0 | 07-15-2000 10:14 AM |