|
#1
|
||||
|
||||
BB 727 recommendations
within the next 2 weeks or so, my 70 Convert Newport should be out with me in Phoenix. A while back I posted that I tore up the converter and the flexplate. As a temp fix I got one bolt in the only useabl hole on the converter just so the movers can get the car on the truck. Well now since the tranny had a leak to begin with, and it has to come out to swap converters, I wanbted to know what I should do. Take the current tranny to a shop to rebuild it, or get a aftermarket tranny, like from summit. If so which after market manufacter should I go with. Also anybody know of any good tranny shops in the Phoenix area?. Also any recommendations for what to have done? It is a 70 Convert Newport that I am looking to hit high 13's. (at least a 13.9 once)The wife and I cant wait till the car get road worthy again . Thanks
Bob |
#2
|
||||
|
||||
ERRR I would say a good shift kit should do the trick right? I am also going to stick with a 2500 stall 'verter. It has a Performer intake and the cam also runs out at about 5500 rpm. A normal rebuild with a like a stage 2 shift kit would be good right? Just looking for some second opinions.
|
#3
|
|||
|
|||
I would fix the one you have and make sure that it is a TransGo kit only.
|
#4
|
||||
|
||||
Thanks. Where can you get the TRans go?
|
#5
|
||||
|
||||
Check with Doug's Performance Transmissions in Mesa AZ. 310 E Southern Ave. 480 964-3832.
these folks do off road racing and other "extreme" automotive sports. |
#6
|
|||
|
|||
If you can rebuild an engine, you can rebiuld an automatic tranny.
|
#7
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
408 recommendations? | racerdave | Circle Track Chat | 16 | 07-20-2009 06:43 AM |
Cam Recommendations | MrFurious | Performance Talk | 10 | 01-01-2006 02:58 AM |
Cam recommendations please!! | Twisted360 | Performance Talk | 28 | 06-06-2004 11:17 AM |
recommendations | HemiAdda2d | Dakota Truck Forum | 2 | 11-11-2002 01:04 AM |
Cam recommendations... | LarsD | Performance Talk | 5 | 06-24-2002 07:53 AM |