|
#1
|
||||
|
||||
Windage Tray for a Magnum 360?
Does the Mopar Performance Windage Tray P4529790 fit the Magnum 360? Am I right in assuming they don't have a Windage tray from the factory?
I put a Windage Tray on my '66 Plymouth Satellite 383 because I ran it at higher RPMs so much & it did give a slight gain in the upper end (10-15 HP). I don't drive in the upper RPM range like I used to, but I thought if the Windage Tray fits my Magnum 360 a few extra HP would be nice. |
#2
|
|||
|
|||
well, one didn't come in my magnum crate motor. as for putting one in.
that should be no problem just swap in the right bolts and put it in |
#3
|
||||
|
||||
I have read that it is interchangeable with the older 360's which are different than 318/340's. I guess the number you gave was for a 360 but I do not have the book in front of me. When I go thru my crate motor I will put one in.
|
#4
|
||||
|
||||
The crate does not have one and yes one from an older LA block will fit.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
windage tray | mopower04 | Performance Talk | 4 | 09-10-2008 06:19 AM |
Windage tray | Jim13 | Performance Talk | 9 | 02-20-2006 02:53 AM |
windage tray bad? | Duster_Dan | Performance Talk | 2 | 08-11-2001 07:47 PM |
windage tray | 65Belv | Performance Talk | 5 | 08-11-2001 08:52 AM |
318 with a windage tray!?! | Joecuda | Performance Talk | 3 | 02-24-2000 06:55 PM |