Parting out 65 D-100 PU

[mr64dodge]

Parting out 65 D-100 PU. Was 318 poly 4-speed. Lots of good sheetmetal. 8 3/4 with 391 gears.

[Crwlaway]

How much do you want for both engine and tranny

[mr64dodge]

The engine turns over and runs though not very well. No noise that I could hear but does smoke. Didn't run it very long so I can't tell you much more about it. It's complete carb to pan has all clutch and bellhousing on it with a car three speed tranny.Was a four speed but was changed to a three speed. You can have it all plus the driveline for $250.00 or B.O. Even the exhaust if you want it. Any other questions please feel free to call me at 209-327-8487. Thanks, Gene.

[Crwlaway]

Hey, i really needed the 4 speed, but i guess it is not on there anymore, but i really appreciate your reply, thanks

[mr64dodge]

What kind of four speed are you looking for. A-833 or the truck. I have A-833's and the four speed overdrives.

[Crwlaway]

Would it make a good four wheel tanny, because thats what i really need, i like the sound of the four speed with overdrive

[mr64dodge]

I take it you have a four wheel drive P.U. What size motor does it have. I don't know for sure if you can put the overdrive tranny with the transfer case. It is the exact same size case as the A-833 four speed. If it will work and you are interested I'd sell the overdrive tranny for $200.00.

[Crwlaway]

Ya i have a 4 wheeler, i have a 318 in it. and that sounds like a good price, would i have to rebuild that one too

[mr64dodge]

I don't think this would have to be rebuilt. It came out of a running p.u. with a 318. I can open it up and check to make shure though. Give me a couple of days to get to it and I'll see. One thing I forgot about is that the overdrive tranny has a bigger front bearing cover which requires a special bellhousing which I also have in case you don't. One guy I know took his bellhousing to a machine shop and had it turned to accept the overdrive unit. Just an idea.

[Crwlaway]

OK thats sounds good, i guess i will talk to you when you take a look at it, thanks

[mr64dodge]

Sorry but I still haven't had time to look at the tranny. It will probably be this weekend. As soon as I do I'll let you know. Thanks.

[Crwlaway]

ok sounds good, if you dont get time this weekend, just wait intill the new year if you want, and enjoy your holidays, i dont really in a hury, so just take your time. Also where about is lodi or where ever you are from, i am near los angles, i am about 50 miles above it.

[mr64dodge]

I am 35 miles south of Sacramento.I could meet you half way like in Fresno if you want. I'll be able to check it out this weekend for shure and let you know.

[Crwlaway]

I am always busy, so i couldnt make it, but i do trust your word on whatever condition it is in. so maybe we could work out some kind of delivery

[mr64dodge]

Before I sell you something you don't need, are you shure this might be what you want for your truck? This tranny is like the car 4-speed but an overdrive. If it's what you want I have to go to Vegas next week on buisness so I could bring it down to you. Make shure cause I don't want to sell you it if it wont work.

[Crwlaway]

well if it is a car tranny then nevermind, i need something to handle the offroad. But thannk you for your time, and thank you for telling me it is a car tanny. I liked the idea that it was a 4 speed with an overdrive. Thanks

[mr64dodge]

No problem. I have a friend who might have a truck four speed. I'll ask him tomorrow. I thought maybe you were converting your four wheeler to two wheel drive but figured I better ask to make shure. Hey do you know anybody who might want to trade a driveable 60's dodge pu for a 73 Charger SE Brougham? Car is Tor Red with black interrior. Bucket seats with floor console. Had 400 hp 4bbl auto, have a good 440 auto to go with it. Also 8 3/4 rear with 323 gears. Car is real straight no rust but needs some interrior work. Thanks.

[Crwlaway]

No i am keeping it 4 wheel, and that car sounds nice, but i dont know anyone out here that would want one. I would trade you but, i dont have a truck that old.

[mr64dodge]

Checked with my friend, he dosen't have what you need. Sorry.

[Crwlaway]

thank you anyway