|
#1
|
|||
|
|||
Starter Ring
When doing a direct drive auto transmission or when using a shivy clutch package, what is the starter / starter ring combination that is used?
|
#2
|
|||
|
|||
I'm using a "coupler" from TCI. It's simply the front of a torque converter cut off behind the ring gear with provision for the drive splines and the tangs for the pump welded in. Uses the std gear reduction starter. Weighs 11 lbs total. Simple, effective , and no special parts needed.
Can't say about the chevvy setup. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mopar mini starter same as late model v8 starter? | bratpack | Performance Talk | 2 | 07-21-2006 08:38 AM |
Starter Grinding on small block with lightweight starter | bratpack | Performance Talk | 1 | 07-17-2006 10:14 PM |
273 ring gap | FG | Vintage MOPAR chat | 4 | 01-25-2003 09:26 PM |
Ring Gap | 65 racer | Drag Racing Forum | 1 | 03-10-2002 06:02 PM |
Ring end gap?? | mopardude | Performance Talk | 2 | 03-19-2000 05:59 PM |